Vehicles
173 not categorized PORSCHE 944 TORQUECan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.100422221 English an official Porsche publication. Each book is approximately 100 pages and details the complete specifications of the models listed. Gives wear limits: torque specs, body and engine serial numbers - vital for rebuilds or restoring.
$68.00
Make a selection 100103038TU997 Mahle 3.8 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets with 23 mm wrist pin. - slip fit, steel (st52) cylinders. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.4:1 compression. - 102 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. *please note: horsepower and torque gains depend on the software used, camshafts, crankshaft and other internal modifications. 700+ hp and torque can be achieved with use of these pistons and cylinders with a proper engine build and software. Contact your sales person for ...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05911 TURBO/GT2 2007-09
$14,654.60
Make a selection 20404HDC4D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup. General Fitment911 2005-08
$1,783.96
Make a selection 100422920 English an official Porsche publication. Each book is approximately 100 pages and details the complete specifications of the models listed. Gives wear limits: torque specs, body and engine serial numbers - vital for rebuilds or restoring.
$52.80
Make a selection 150BA79174 Headers for racecars only General Fitment911 1970-73
From $846.94
Make a selection 150BA79185 Increase the horsepower of your 914/6 or 916 with bursch performance headers. They have been dyno, track and street tested since 1958. Bursch headers are available in a variety of diameters to suit your displacement and driving preference. Each hand made header is mandrel bent from durable 16-gauge steel and is coated with 1,200-degree high temp paint. Features: increased horsepower and torque weight savings 16 gauge steel coated in 1,200 degree high temperature paint sold as a set (left and right). 1 necessary per car. Please note: this replaces your stock heat exchangers and does not include heat. These headers do not include provisions for o2 or temperature sensors. Use of this product for purposes other tha...(choose a part on the right to read more)
$1,335.40
Make a selection 20404HD0FD The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General Fitment911 2005-08
$1,690.07
Make a selection 170111045 - + 12 crank hp & + 8 crank torque General Fitment911 1989-94
$164.15
Make a selection 2009010201 Performance eproms can increase horsepower. After replacing the chip in your Porsche’s engine you will immediately notice the advantage. For this particular application, Porsche 911 Carrera, dyno tests showed gains in horsepower and torque up to 7% over stock with no other modifications. This is the type of gain that you can actually feel in the “seat of your pants” on the street or on the track. General Fitment911 1987-89
$468.88
Make a selection 170910242 Dansk stainless steel race headers produce dyno proven horsepower and torque as well as a phenomenal sound! They feature equal length, mandrel bent tubing and a motorsport merge collector to further improve exhaust gas flow, reduce back pressure and optimize exhaust gas scavenging. These are a quality tuning product manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Features: +15 hp and +14 tq ga...(choose a part on the right to read more) General Fitment911 1970-73
From $2,757.10
Make a selection 2009015200 Performance eproms can increase horsepower. After replacing the chip in your Porsche’s engine you will immediately notice the advantage. For this particular application, Porsche 911 Carrera, dyno tests showed gains in horsepower and torque up to 7% over stock with no other modifications. This is the type of gain that you can actually feel in the “seat of your pants” on the street or on the track. General Fitment911 1984-86
$468.88
Make a selection 2009015201 Performance eproms can increase horsepower. After replacing the chip in your Porsche’s engine you will immediately notice the advantage. For this particular application, Porsche 911 Carrera, dyno tests showed gains in horsepower and torque up to 7% over stock with no other modifications. This is the type of gain that you can actually feel in the “seat of your pants” on the street or on the track. General Fitment911 1984-86
$468.88
Make a selection 2009010206 Performance eproms can increase horsepower. After replacing the chip in your Porsche’s engine you will immediately notice the advantage. For this particular application, Porsche 911 Carrera, dyno tests showed gains in horsepower and torque up to 7% over stock with no other modifications. This is the type of gain that you can actually feel in the “seat of your pants” on the street or on the track. General Fitment911 1984-86
$468.88
Make a selection 20303HDC4D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup. General Fitment911 2005-08
$1,586.45
Make a selection 20202HD0FD The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. This clutch is designed for the street enthusiast or weekend racer. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General Fitment911 1998-05
$1,502.96
Make a selection 170111044 - + 15 crank hp & + 12 crank torque General Fitment911 1989-94
$412.50
Make a selection 20101HDC6D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General Fitment911 1998-05
$1,502.96
Make a selection 20303HDC6D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General Fitment911 2005-08
$1,502.96
Make a selection 20404HDC6D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup. General Fitment911 2005-08
$1,690.07
Make a selection 20303HD0FD The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General Fitment911 2005-08
$1,502.96
Make a selection 21011123PSE Catalytic bypass pipe "x torque" design made by m&m exhaust gmbh in Germany. The x torque design in is a true x pipe design. It is open in the center to add backpressure for torque. Give's you 10-15 ft-lbs of torque in the mid range along with 10-15 hp in the higher rpms. Why settle for the traditional cross over cat design when you can add torque in the mid range where the 996's need it most! Dme programming is necessary. Without it you will get a check engine light (cel). Please note: this is only for models with the optional valved Porsche sport exhaust (pse). We recommend replacing all of the hardware when installing, please use part # FVDmk996300 General Fitment911 1998-05
$764.50
Make a selection 20505HDC4D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup. General FitmentBOXSTER 1997-04
$1,586.45
Make a selection 20808HD0FD The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General FitmentBOXSTER 2005-08
$1,502.96
Make a selection 20505HD0FD The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General FitmentBOXSTER 1997-04
$1,502.96
Make a selection 20707HDC4D The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup. General FitmentBOXSTER 1997-04
$1,586.45
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |